CyberPower PDU20SW8RNET Manuale Utente Scaricare il pdf (Pagina 27)

UPS/Status page of a PR1000LCDRTXL2Ua

Input

 Status: Displays the present status of the utility power supplied to the UPS.

 Normal: The voltage and frequency of the utility power is normal.

 Blackout: There is no utility power being supplied to the UPS and it is supplying battery power to connected

equipment.

 Over Voltage: The utility voltage is higher than the high voltage threshold and the UPS is using the battery to

supply power.

 Under Voltage: The utility voltage is lower than the low voltage threshold and the UPS is using the battery to

supply power.

 Frequency Failure: The frequency of the utility power is out of tolerance and the UPS is supplying battery

power with a fixed frequency.

 Wiring Fault: The UPS has detected a wiring fault in the outlet it is plugged into.

 No Neutral: The neutral wire is not connected well.

 Generator Detected: UPS is being supplying power by generator.

 Power Failure: The utility power being supplied to the UPS is not qualify due to other power noise and

distorted conditions.

 Voltage: The voltage of the utility power supplied to the UPS.

 Frequency: The frequency of the utility power supplied to the UPS.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 132 133

Nessun commento

CyberPower PDU20SW8RNET Manuale Utente Pagina 27